Ask Experts Questions for FREE Help !
Ask
    IKARIS's Avatar
    IKARIS Posts: 6, Reputation: 1
    New Member
     
    #1

    Feb 3, 2009, 10:33 AM
    GFCI circuit breaker
    I was hosing down an outside wall and must have sprayed too close to my electrical outlet (This outlet had a pump plugged into it) as it tripped the GFCI in my bathroom. I reset the GFCI and went back outside and the pump was still not working; I went and reset the GFCI once again and now the reset button stays pushed in. I replace the GFCI CB and it still did not work so I replaced the outdoor oulet and the GFCI reset still will not pop out. Any suggestions out there.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #2

    Feb 3, 2009, 03:27 PM

    Are you sure its on the same circuit?
    If you have a GFI in the Panel, all the rest downline can be regular recepticles.
    If you press the reset button and it doesn't reset, you have a problem with the Load wires, or there is no power to GFI.
    Newer ones won't reset if power not present.
    rail1911's Avatar
    rail1911 Posts: 27, Reputation: 3
    New Member
     
    #3

    Feb 3, 2009, 04:22 PM
    Try looking in your circuit control pannel to see if you set off any of your breakers or fuses. If so, reset or replace them and see if that works.
    Fr_Chuck's Avatar
    Fr_Chuck Posts: 81,301, Reputation: 7692
    Expert
     
    #4

    Feb 3, 2009, 08:51 PM

    Moved to electricial

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

GFCI Outlet and Related Circuit Breaker [ 3 Answers ]

I have a 15 amp GFCI outlet that is connected to a 15 amp outside breaker. When using electrical items on the circuit, my outside breaker is tripping without the inside GFCI breakers tripping. I am wondering whether the outside breaker is faulty or should be 20 amps. It doesn't make sense to me...

GFCI Circuit Breaker. [ 2 Answers ]

I recently ran a branch circuit to the exterior of the house to add a receptacle on the patio. The existing 15 amp breaker protected a circuit that had only three plug outlets and one switched ceiling light. The circuit is very lightly used. So I want to add GFIC protection in the form of a breaker...


View more questions Search