Ge cl200 mode 6

smithneeley Posts: 1, Reputation: 1

New Member

Jan 25, 2010, 12:40 PM

Ge cl200 mode 6

On a GE CL 200 digital watt hour meter, Form 2S, what is displayed when mode 6 is dispayed

tkrussell Posts: 9,659, Reputation: 725

Uber Member

Jan 25, 2010, 12:54 PM

You can start here:

GE Energy

Have the model number handy, find your meter, find the manual for it.

Add your answer here.

Check out some similar questions!

Blower motor won't turn on in automatic mode it only turns on in manual mode [ 4 Answers ]

I have a ruud furnace and it won't turn on when set on "auto" mode,its only turning on in "manual" mode and blows heat.The fan turns on when put in the "on"/"fan" mode. I have to turn it off manually once the rooms have reached the desired temp.I could here the blowers start than they shut off...

Blower motor won't shut off in heat mode but works fine in A/C mode [ 0 Answers ]

I have an older lennox unit that is pilot light. The blower motor won't shut off when the temp is reached on the thermostat but it works fine in ac mode. What could cause this? I'm confused because it worked 2 weeks ago when I turned my ac off and the thermostat is in auto and only shuts off when I...

Blower in furnace works in heating mode, not in cooling mode [ 5 Answers ]

The furnace is an older model Carrier. I do not know at this time the exact model. It is at this time about 20 years old. The central air is a newer Carrier Performance series model. It is two years old. I have checked to make certain the blower moves freely; it does. The blower in the...

Furnace turns off at 'ON' mode and will not operate at 'AUTO' mode [ 6 Answers ]

The furnace will not turns on at "ON' mode. After some reading, I thought it would be the pilot light that has gone out. I re-lighted the pilot light to see blue-red flame, but the furnace will turn off AGAIN after 3-4 hrs. Replaced a new Honeywell non-programmable thermostat today with the...

Furnace turns off at 'ON' mode and will not operate at 'AUTO' mode [ 2 Answers ]