Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Can a new concrete pad be installed over an existing flood damaged basement floor
[ 0 Answers ]
Purchased a 1927 house. Basement walls were completely replaced several years ago, but floor was not. Flooding occurred due to freezing pipe-also 2-3 years ago. Basement floor is severely cracked and ground moisture coming up from below (moist but not pooling). Ideally the whole floor should...
Installed Recessed Lights switches and power downstream
[ 1 Answers ]
I have installed 10 recessed lights that require multiple switches for control; Hallway, Room 1 & Room 2. Power runs from the main panel using 14/2 to first light in hallway. Each light is then connected with the 14/2. I Installed switch at the beginning of hallway and it controls hallway, Room...
Installed a shower in existing bathroom, had hot water and now have none. Any ideas?
[ 2 Answers ]
We have a GE Profile hot water tank, approx 6 years old (came with a 9 year warranty). Over the weekend we installed a Delta In2ition shower (handheld shower clips into wallmounted head, replaced two hot/cold handles with a single lever and replaced existing bath spout. After the installation,...
Has anyone installed a central vacuum in existing house?
[ 0 Answers ]
If possible, I would like to do this: Holes can be drilled up through the floor plywood and bottom plates and PVC pipes can be run up interior walls from the basement. For second floor wall inlets I would have to run pipes down interior walls from the attic. Presumably I would have to get a...
Installed recessed lt, addd brkr, light goes low frequently
[ 4 Answers ]
Hi We installed recessed light(6), run through new circuit breaker. Now frequently when fridge automatically triggers, all house light dims and come back normal. This happen almost every 5 minutes. Before it newer used to happen. Please suggest what to do View more questions Search
|