Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Fluorescent light not getting enough power from GFI?
[ 8 Answers ]
I have fluorescent lighting fixture under cabinet in kitchen containing two bulbs. Only one works when switched on, except when I reset GFI and remove plug from coffee maker on the same GFI outlet. GFI tests okay. If GFI is faulty, why does is still work to light one of the bulbs only and also...
Fluorescent fixture problems
[ 2 Answers ]
I have a fluorescent over head fixture that doesn't work properly. It takes a long long time to start (like 10 minutes, sometimes). However if I fiddle with the lamps it will start up, and if I have it on for a while, I can turn it off and immediately back on. I don't know if the fixture is bad or...
Fluorescent light ballasts '?' -- primarily for TK
[ 11 Answers ]
My church has acoustical tile ceilings, and therefore is lit in the majority of areas with 2x4' recessed fluorescent fixtures. These are the types with four bulbs and two ballasts. When they moved into this location, one of the maintenance men unscrewed one bulb in each fixture, so only two...
New Fluorescent Light bulbs and their use
[ 9 Answers ]
I’m sure this has been asked … but I am looking at these 13Watt replacement bulbs that are 60 Watt replacements. Now, I have light fixtures in my house, which are all labeled with Use 60 Watt Maximum. Can I use a higher Fluorescent (and hence get more Light Output) into some of my darker...
Changed from fan to light fixture and now light will not shut off
[ 1 Answers ]
Today I tried to replace a ceiling fan to a light fixture. I connected the black to black white to white and copper to ground. I have a red wire that I don't know what goes to. The light now will not turn off. Should the red wire be connected to something? View more questions Search
|