Ask Experts Questions for FREE Help !
Ask
    MrDesmond's Avatar
    MrDesmond Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 6, 2008, 02:14 PM
    Fixing Pull chain on Celing Fan
    I work for a small group that cleans up Torn down houses, I Need advice on Fixing a Ceiling fan Pull chain. The Fan has 2 chains, obviosly one for Fan and one for lights. But the light has 3 settings, first is the Regular Lights(aka 4 in a cirlce) then a Dimmed setting that Came from a Light above the Fan blades. The Chain was pulled out of the Ceiling fan and now the Light setting is Stuck on Dimmed, the Fan is fine. Just need to Fix the lights. If anyone has any knowledge or ideas on how to Fix this Problem I would be deeply Grateful and thankful. ^_^
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #2

    Oct 6, 2008, 02:38 PM

    Just replace the pullchain switch. You need a 1, 2, 1+2 pullchain available at most hardware stores. See:

    Ceiling fan pull chain replacement and repair - Ceiling Fans N More
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to repair a celing fan pull chain [ 3 Answers ]

The pull chain on my ceiling fan that turns the light on and off has come all the way out of the base of the fan. How can I fix this? I tried unscrewing the piece that the chain hung from, but saw no way to reattach a new pull chain.

Celing fan pull switch [ 8 Answers ]

I have a stacked switch that will hold 8 wires there were 2 black 1 grey 1green and 1 purple. Some one replaced it and got it wired wrong the fan stayed on low and the switch would not effect it. I took and old single layer switch from another fan touched the black to each wire to find the speeds...

Hampton Bay pull chain [ 3 Answers ]

I disconnected all 4 wires from the pull chain before writing down their configuration. I have 2- black wires, a red wire and a blue wire. My new pull switch is labeled L - 1 - 2- 3. Does anyone know the wiring configuration?:confused:

Need Help Fixing Shower Pull Up [ 1 Answers ]

When I pull up knob for shower the water comes out of both the shower head and the spout below. So very little water pressure coming from shower head.

Pull Chain Replacement [ 1 Answers ]

I turned off my power and went to the hardware store to purchase a replacement pull chain light switch for my ceiling fan/light only to find upon my return that the little woman thought she would help me by removeing the old switch and bulb socket plate without labeling old wires. So here is my...

View more questions Search