Ask Experts Questions for FREE Help !
Ask
    Blackschlitz's Avatar
    Blackschlitz Posts: 1, Reputation: 1
    New Member
     
    #1

    Apr 27, 2012, 05:05 PM
    Fan will not work properly after power interuption
    I have sevral ceeling fans one of wich will not run at all after power has been tuned of and then restored without multuple tryes of restoring current.remote recever is new moter is good lightes are good. Power is 110.

Check out some similar questions!

Minka Ceiling Fan power to fan cuts on and off, light will work. [ 0 Answers ]

My Minka ceiling fan will start when turned on and work fine for 5 minutes then the power cuts off and the fan begins to shut off. Just as you think the fan is completely shut off it starts back up on its owns. It will continue to do this at different intervals, maybe it takes a couple minutes...

Remote does not work properly [ 1 Answers ]

I have a new ceiling fan replacing an old one. The new one has remote. I have hooked up the ceiling fan/light using the electrical wiring diagram. When I turn the power back on, the fan motor starts to turn. I tried to turn it off using the remote and the lights came on. I tried to us the light...

Why will the power source not work to newly installed ceiling fan? [ 3 Answers ]

I am trying to install a new ceiling fan... I have installed the motor and wanted to test Power to turn motor before attaching light and blades... when I switched on /off from Wall it is not getting power.. Tested on/off switch next to it that controls porch light And it works fine. Used...

Ceiling Fan won't work after power outage [ 1 Answers ]

I have a Harbor Breeze ceiling fan with lights and remote control. Due to a problem with my air conditioning unit, the power in the house shut off. After power was restored, the fan lights only work by pulling the chain but the fan blades do not work by pulling the chain or using the remote. What...

Power outage ceiling fan doesn't work [ 2 Answers ]

There was a power outage last night and 2 of my 4 fans does not work. The 2 that won't turn on were off when the power went out and will not turn on. The other 2 are OK. They were on when to power went out. What do I do?


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.