Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Installing fan and light switch for ceiling fan
[ 9 Answers ]
I am trying to install a switch that controls both the ceiling fan with 3 speeds and a dimmer switch all in one unit for a hunter ceiling fan. At the wall switch there is a black wire which is always hot, a red and a ground. At the ceiling, where I removed a light fixture, there is a black, red,...
Hampton bay fan came with wall remote but Fan is not operated from a wall switch.
[ 1 Answers ]
I received a New Hampton Bay fan to replace an existing fan. The existing fan is operated by two pull chains. The new fan came with a wall control device. The problem is that the fan is not operated from the wall switch and there are no pull chains. Can I use a Hampton Bay remote with the...
Ceiling fan replacement fan switch
[ 1 Answers ]
I was trying to replace a ceiling fan 3 speed switch. I forgot to mark the wires. I have a red wire coming out of forward and reverse. I have a black wire coming out of the ceiling and I have a blue and black wire coming from the motor of the ceiling fan. The switch is marked L, 1, 2, 3-Do you...
FAN Switch
[ 3 Answers ]
Fan swith in harbor breeze 3-speed ceiling fan requires replacement. I purchase a new 3-speed fan switch. What is the correct connecting for the wires. Fan Switch L, 1, 2, 3 / Wire color code; Black Red, Yellow and purple.
Trouble with ceiling fan on a dual fan/light dimmer switch
[ 1 Answers ]
I just installed a new Harbor Breeze ceiling fan and dual fan/light dimmer, also from Harbor Breeze. Unfortunately, now I'm scratching my head... Do I have a bad dimmer switch? Here's the problem: 1. The light will turn on only when the fan speed on the wall switch is set to high. 2. When... View more questions Search
|