I have a question regarding the wire hookups for my fan. Right now I have the connections as: black wire to black wire to black/white wire, white to white wires and green to green wires. But with these connections the fan only works from the pulls on the fan itself. No response from the wall...

Is it best to use flexible non insulated flex duct (not the metal flex duct) or is it best to use rigid pipe?

Why does my ceilng fan in my bathroom leak water on the floor

I asked the following earlier today: I have a 20 year old Lennox Conservator 3... gas furnace/AC combination unit. The problem started as: When I set the thermostat to "heat" and fan on "auto", the burner would light and stay on for a few minutes then shut down (as it is supposed to do)...

I have successfully installed a ceiling fan before but the old house I now live in has wiring that baffles me. The Hampton ceiling fan I am installing has the usual black, blue, white, and green (ground) wires. The outlet does not appear to have any ground wires (so I will ground the fan to the...