Ask Experts Questions for FREE Help !
Ask
    claudioj's Avatar
    claudioj Posts: 1, Reputation: 1
    New Member
     
    #1

    Sep 10, 2010, 06:39 PM
    Fan only operates on low speed.opened up the bottom and two units(guess remotes/modul
    Fan was operating normal in all speeds.now it only runs on low.
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
     
    #2

    Sep 11, 2010, 04:39 AM

    Bad pull chain?
    Bad motor?
    Bad wall switch?
    Bad remote?

    You don't give nearly enough details to base an answer on.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Constant fan on low speed [ 4 Answers ]

My neighbour has a clare brothers furnace. Model HEMI 70BD. I replaced the module for them because it was shot. The furnace fan now runs on low speed all the time and during the call for heat then goes into high. T-stat is about 18yrs old. Mercury switch. The humidifier and EAC are wired together...

NEW Harbor Breeze fan only operates in high speed [ 1 Answers ]

Hello, I recently installed a new Harbor Breeze ceiling fan with light kit, remote and no pull chains. I have installed numerous ceiling fans before without any previous problems. This fan in question operated A-OK for the first day or two. Now, the fan only operates in high speed, no matter...

Furnace fan not working at low speed [ 1 Answers ]

I have a heating/air conditioning unit in my attic. The air conditioner works fine but the heater doesn't. The main furnace fan/blower does not come on when thermostat calls for heat. I believe that the problem is that the low speed fan setting is not working, and that the low speed fan setting...

Low speed on fan doesn't work [ 1 Answers ]

I purchases a Hampton Bay Transitional Colleciton "Medeteranean" fan. After installing it, everything works except the low speed on the fan. The other fan speeds work and the light works. This fan is operated by remote control. I even reprogrammed another remote from another fan, everything except...

Lost low speed on ceiling fan [ 1 Answers ]

I have a ceiling fan that works fine on the medium and high speed settings but does not work or rotate on the low speed setting. What is the cause and can I repair it?


View more questions Search