Ask Experts Questions for FREE Help !
Ask
    howardk03's Avatar
    howardk03 Posts: 1, Reputation: 1
    New Member
     
    #1

    Feb 4, 2015, 01:02 PM
    Fan light access
    Can't see how to access the center light above the fan blades on my Habor Breeze fan.
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
     
    #2

    Feb 4, 2015, 02:03 PM
    Fan model?
    Maybe a picture?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Ceiling fan light bulb access mystery [ 1 Answers ]

After much online research I believe my ceiling fan is a Casa Vieja Probe II. It was here when I moved in but there is no brand tag on it that I can find or any manual for it. The fan responds normally to the remote but the light has just quit working. I would like to access the light bulb to check...

Installing a hunter ceiling fan & light control to operate my fan w/light [ 3 Answers ]

I just replace my kitchen light with a new ceiling fan w/light. I now was going to try to install my hunter ceiling fan & light control switch. The switch has a black, blue and red wire w/green ground. The wall outlet has a black, red and white wire with ground. I just wasn't sure which wires...

Hampton breeze fan with light - light comes on after fan (about 1 sec delay) [ 3 Answers ]

The fan/light is controlled by two 3 way switches (which I checked for loose connections and were fine) the light comes on a little over a second after the fan (which comes on immediately after hitting the switch). Is there any reason for this delay? I have checked an rechecked all of my...

How to install a ceiling fan with a light and switch controlling the light and fan [ 5 Answers ]

Hi, I've read so many posts, but can't figure this out. (don't laugh) At the switch: The wiring from the wall has RED, BLACK, and GROUND (bare). The switch is a dimmer for both the fan and light. Wires are BLUE, RED, and BLACK. SO, how do I hook this up? At the fan: The wiring from...

Installing a light kit on a ceiling fan where a switch enables both fan and light [ 2 Answers ]

I have a Hampton Bay ceiling fan with three wires emerging from the top: white, black, red, and green. Presently the white, black, and green are hooked up to a switch and the fan works fine. The red is capped. The fan also has a chain which I intend on keeping on the medium setting indefinitely. ...


View more questions Search