Ask Experts Questions for FREE Help !
Ask
    eelmar's Avatar
    eelmar Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 10, 2011, 10:55 AM
    Electrical question free answers?
    What do I do with a ground wire on an new ceiling fixture when there is none coming from the ceiling? I have a very old home with plaster ceilings.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Dec 10, 2011, 11:04 AM
    Not much you can do without running a new ground wire. But, check for a box ground by testing from black to box with a VOM. Some older homes wired with BX would have the armored case as a ground. If it shows voltage connect the ground to the box. If none, tape the ground end and put it back in the ceiling box.
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
    		  
    #3

    Dec 10, 2011, 08:09 PM
    Time Out, please.

    Running a new ground wire is not allowable.

    The entire circuit has to be redone (from the main panelboard to the outlet) with cable that is listed for the needed amperage.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Free electrical answers? [ 3 Answers ]

I have a number 12 copper coated wire from house it gose 300 feet the panel in house supplies 120 volts it is to power a 1200 watt saw what would be my approximete voltage to the saw

Free answers to electrical questions [ 1 Answers ]

I was called upon to try and fix a GFCI in a bathroom that occasionally trips. There is a 12/2 20 amp feeder coming into a three gang plastic box. In the box are the GFCI, a single pole switch to a fan, and a dimmer switch to a lighted medicine cabinet. Occasionally, the GFCI trips after you turn...

View more questions Search