Hi TK. I am running 400 amp service into my new contruction home. The electric compnay is running a single 400 amp line to the meter. I have to split it to the two panels at that point. You had told me once before that I need a 320 amp meter socket and then run 2-200 amp lines to the separate...

I am installing a single phase, 200 amp service on a new summer home that I am building. My question is about wire size for wire running from the meter pan to the breaker panel. I am told that I need 2/0 wire for each phase, but an electrician told me that I can drop down one size (1/0) for the...

What gauge wiring does the service wire need to be to feed a 200 amp electrical service? Also - aluminum or copper?

The house I just bought was built in 1952. It's a 3 bedroom, 1 bathroom with the standard screw in fuses (total amps unknown). Presently I'm doing a remodel. Adding a third bedroom & extra bathroom, washer & dryer, dishwasher, newer & larger refrigerator, bigger microwwave, probably 3 window air...

My electrician and the power co. have both agreed that 2/0 urd aluminum is sufficient for a 100 amp service for a mobile home. The run is 300'. There is a 100 amp disconnect outside and inside the mobile home. Is the acceptable? I'm just double checking their wisdom in this matter. Thanks in...