 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Does the Hampton fan have a relay for the light that goes bad?
The lights on the Hampton Bay I have in my office at home stopped working (I use a remote and there are no pull chains) When I press the button for the lights, the light on the remote does not come on, nor do the four 60 watt lights on the fan (the fan function works fine, and the little light on the remote works too when turning on the fan). I have the identical fan with remote in the living room. As an experiment, I tried the living room remote on the fan in my office and while the fan would come on, the lights would not (yep, I programmed it to match the "bad" office fan). Interesting to note that when I used the remote from the living room, the remote's indicator light comes on, but the fan lights still don't work. Seems to me that the problem is in the receptor in the fan. Any suggestions would be appreciated. Thank you, Ron.
|
||||
Check out some similar questions!
At the vents no air is blowing. The outdoor unit runs but the evaporator coil freezes up. The blower motor is not working. I pulled the blower motor out and tested it and it runs. So the motor is good. How do I find out if my fan relay is bad? Is there something I can do with an electric...
The fan/light is controlled by two 3 way switches (which I checked for loose connections and were fine) the light comes on a little over a second after the fan (which comes on immediately after hitting the switch). Is there any reason for this delay? I have checked an rechecked all of my...
Hello just bought a house with a hampton bay fan and light, remote control no pull chains. At night the lights will come on without even touching the remote. Also the fan shut itself off last night. What do I need to do?
I installed a new CFL lightbulb, when I turned on the light I heard a pop and smelled something nasty. Afterwards when I turned off the light all the left over light bulbs constantly flicker. They turn on OK but only flicker when I turn them off. By turning off I mean with the remote, but leaving...
Installed fan 3-4 months ago and have had no trouble until past week when light on fan started flashing intermittently. Fan has remote and is wired directly to power source -- no switch. Checked all connections, but cannot figure out why light is flashing. Any help is much appreciated!
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
