I have a Hampton Bay Exterior Motion Sensor Wall Lantern light. Model 248-523, Bar code 0-46335-90429-3. The light has two slide switches, one on each side of its base. I am missing the installation instructions and would like to know how to set the slide switches so I can have the light operate...

I have a Goodman AEPF 183016 air handler. How do I change the DIP swishes to add CPM? The product specifications state that you can speed up the fan using the #7 dip switch. Where are the DIP Switches?

We have a 3.5 ton Trane heat pump with a 4 ton Tempstar variable speed air handler (both units new in 2004). In January we were told that "all the dip switches were OFF"; so they had to have been that way since the unit was installed. The air flow has always been too strong so, at our request,...

I have a Hampton Bay ceiling fan with a faulty reverse switch. What I'd like to do is take the switch out and bypass the switch instead of replacing it. The switch is a six contact DPDT. Grey and white are the contacts in the center. Pink and Yellow are the contact at the bottom, and there are...

The chain on the fan switch broke of and I bought a replacement at HomeD. I forgot to tag the wires and can't seem to properly connect the 4 wire to the new switch. Cable colors are: White, Black, Yellow and Blue and the switch has an "L", #1, #2 and #3 where the cables should be connected. Does...