Ask Experts Questions for FREE Help !
Ask
    Hugg's Avatar
    Hugg Posts: 8, Reputation: 2
    New Member
     
    #1

    Apr 23, 2007, 07:27 PM
    Diodes in a door bell
    Would you tell me what is the purpose of a diode in a door bell push botton?
    ebaines's Avatar
    ebaines Posts: 12,132, Reputation: 1307
    Expert
     
    #2

    Apr 24, 2007, 08:06 AM
    I am no expert on this, but I can guess...

    The doorbell is powered by an AC transformer, but the bell wants to be driven by DC. I think the bell typically consists of a spring-loaded plunger that's operated by an electro-magnet, so that the plunger strikes the bell when you push the door bell button. The electromagnet wouldn't operate properly on AC current, as that would cause it to vibrate at 60 Hz, rather than just move in one direction when you press the button. The diode allows current flow in only one direction, hence it takes the AC current and cuts out the half of the wave that's the wrong polarity. Anyway, that's my guess. I would actually think that the bell manufacturer would have built the diode into the bell housing or transformer, not the button - perhaps it's a redundant "belt and suspenders" approach?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Door bell wiring [ 1 Answers ]

I recently replaced my front door bell because it kept going off without being pushed. When I removed the old one I noticed some type of diode or resistor thingy behind the button linking the two leads together. The new button did not come with this thingy. Now when I press the new button it...

Door bell makes awful noise [ 1 Answers ]

How can you tell if your door bell is done working? And if so are they hard to replace? I am a single woman?

Door bell wiring [ 1 Answers ]

I would like to know what the circuit of a door bell (front lighted button) no back door bell, how it is wired with four wires. Two solid blue and two blue/white. Four each on the transformer ane four on the bell transdusher. Two on the button, front door. How does this work?

Door Bell Ringer [ 5 Answers ]

I move to this House, and the door bell sound more like a alarm than a door bell( is extremely loud and irritating). The ringer brand is bticino (model 382321 made in Italy). I been looking to change this one to a more easy to listen chime or bell. But everything I found is an external bell box....

Door bell ringer replacement [ 3 Answers ]

I'm replacing just the ringer part of the doorbell (the type of doorbell with a transformer). Should I shut off the electricity when doing this, or since they are low-voltage wires is it OK to install it with the electricity on? Or is this a stupid question ;) The way the electricians wired our...


View more questions Search