 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Convert remote fan control to 3 speed switch
Casa vieja fan remote controlled.want to convert it to 3 speed switch.fan is about 10 yrs old.4 wires coming from fan winding,yellow,purple,red and brown.Can only get ohms readings across yellow to red and purple to brown.Brown and red connect to start capactor. After trying all combinations,could not determine which was ground and which were speed leads.can it be done?
|
||||
Check out some similar questions!
I have a hunter fan with a remote control unit.. part no... 85095-01. Anyway what is happeneing is I don't have high speed only low and medium. I have another Hunter fan exactly like this one and it has high speed so I know it not working. What can I do to correct it?
Just installed a hampton bay ceiling fan with remote control.. the remote control works on the lights to turn them on and off but will not turn on/off fan or contol speed. What's wrong.
Customer has ceiling fan which is only remote control. We want to wire a wall 3-speed wall switch instead of the remote. The fan unit only has intrernal wiring for the remote use. It has 4 wires going to the motor for speed control. How do I connect these wires to a single incoming hot wire...
Is it possible to convert a chain control ceiling fan to remote control?
I have a Hampton Bay remote control fan, it goes at 1/2 speed in full and medium and does not go at all in slow. The forward/reverse arrow on the remote LCD indicates the opposite direction the fan is moving.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
