Ask Experts Questions for FREE Help !
Ask
    ABHAY9's Avatar
    ABHAY9 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 22, 2013, 10:31 AM
    Contactor Connection to Auto Mains Failure system
    Hi,

    Warm regards to every one here, its my first post in this forum.

    I need help regarding one of the project I need to get it done with an electrician who is not aware of electronics of AMF Relay and Contactors, but has experience in wiring and other stuff.

    I need to hook an AMF Panel to a 40 KVA Generator for 2 House connection, I did research and made a wiring diagram to what I understood in the file AMF-Layout2.pdf.

    I have attached one more file from the manual of AMF Relay called AMF Wiring Diagram.pdf

    The confusion is on connecting AMF to contactor release port (i.e. 11,12 for mains and 13,14 for Generator in AMF Wiring Diagram).

    Wiring on port 11 is Mains and port 12 has to be other end of Mains contactor (KM), but it shows KG then KM, And other way around for port 13 which is from (Generator) to Port 14 for KM and then KG.

    I am not able to understand how to connect the contactors to AMF relay, please help me.

    Regards
    Abhay
    Attached Images
  1. File Type: pdf amf-Layout2.pdf (12.0 KB, 124 views)
  2. File Type: pdf AMF Wiring Diagram.pdf (121.0 KB, 196 views)

Check out some similar questions!

Replaced contactor and still won't go on.unless I keep the 2 buttons on the contactor [ 10 Answers ]

I replaced the contactor on outside unit it will not go on unless we hold the 2 button like things down. Once we let go it turns back off.. What could it be now

Aerated septic system failure [ 14 Answers ]

I have a septic system that smells up the bath and yard. I have noticed it for the past couple of years and decided to get the tank pumped out and a new aerater installed.It seems worse when there is high traffic,which is common here, as this is a fishing camp.I have a 2 inch vent in the...

2 Pole contactor heater connection [ 1 Answers ]

I have a heater that uses a 2 pole contactor between the heater contorl and the power supply. The contactor is a White Rogers 90-249 40 FLA @ 277 VAC. There are no instructions on which pins to use on the contactor for power in, where to connect a ground and which pins to use to connect to the...

Fuel system heat failure [ 2 Answers ]

I have a 1993 ford taurus 3.8L V6 automatic GL. My problem is that when it gets very hot and humid my car will stall. I hooked up a fuel pressure gauge when it stalled and the fuel pressure read below 20. I let it cool off for about an hour and the fuel pressure read 35-40. What in my fuel system...

89 Honda CRX, possible fuel system failure? [ 5 Answers ]

Today, I was in the middle lane of a four lane highway. I was stopped at an intersection. Out of nowhere my oil and battery lights flicked on. It was almost like I had killed my car (it's a manual). I know I didn't, but I tried to start it anyway. It wouldn't start. The same lights kept coming on....

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.