Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How to change ceiling fan remote batteries on a hamilton bay remote control unit
[ 3 Answers ]
Before I break the darn thing, can you tell me if the back panel comes off or if I have to unscrew the top and bottom screws?
Connecting ceiling fan wires
[ 4 Answers ]
I have two white and two black plus the ground wire coming from the ceiling. There is one white, one black, and one blue wire on the ceiling fan... I have tried everything but cannot get the light to work on the ceiling fan... How should these wires be connected so that the ceiling fan and light...
How do I correctly wire a new ceiling fan (with a remote) when there are 2 switches?
[ 9 Answers ]
I am trying to replace an old ceiling fan (that had a light) with a newer version that has a remote to control both the light and fan. The old fan was wired to work on 2 separate switches - one for the light (I'll call it switch #1) and one for the fan (switch #2). There is a third switch in the...
Connecting Remote to Hampton Bay fan with light kit
[ 7 Answers ]
I brought a remote control for a fan that doesn't come with remote control. I have 2 wire (white and black wire) from transmitter to connect to AC power, but my room has been prewired for light and fan, therefore there is 3 wire white, red and black. I connected the black to the black and white...
3-wire home, 3-wire fan, 2-wire remote
[ 9 Answers ]
Greetings, My home is 3-wire. I bought a Hunter ceiling fan (model 23811). The fan came with a remote assy. That I do NOT want to use... The fan has standard 3-wire connections (black, white, blk&white strip, ground). The remote receiver home-side wiring looks to be for 2-wire (blk and white).... View more questions Search
|