Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Changing light fixture- wires ( red, black and white?)
[ 24 Answers ]
Just changed light fixture. When I put the power back on the light worked but the switch on the wall will not shut the light off. In the ceiling there was 3 wires. One black,one white and one red. The fixture that I put up has only black, white and ground. So I attached the black to black,...
Changing fixture, light stays on
[ 12 Answers ]
Changing old fixture to hampton bay ceiling mount. After connecting the red wire from the switch to the wrong connection, re-did connetion, breaker tripped when the light switch turns off. Redid connection again, making sure everything was connected, light is on, no breaker tripping, but light...
Putting a chain pull on a dual light wall fixture
[ 6 Answers ]
I'm replacing a bathroom light scounce it has two separate bulb holders. I'm trying to put a chain pull on it. The bulbs each have a black & white wire and the little chain kit has two black wires. I can get the lights to light, but the chain pull will not shut them off. Please help.
Changing a light fixture on ceiling fan
[ 3 Answers ]
I have a Hampton Bay 52" Huntington fan with attached 4 light light kit- I purchased a Hampton Bay single light/bowl type replacement kit- can't figure out how to wire it together- old assembly has a nine pin connector- new light has two wires- any suggestions- have callled Home Depot and they... View more questions Search
|