I bought a bellhaven ceiling fan harbor breeze and am trying to install a remote wall switch. Before all this remote business, I had the fan working fine with pull chains. From my ceiling box I have a red, black, white and green wire. I need to connect it to the remote which has three wires, a...

I have a ceiling fan that I installed and has been working fine up until about a week ago. I have done everything I can think to get it working again. I accidentally touched what I am assuming is the neutral wire to metal inside the box in the ceiling and all of the sudden it started working...

Hello, I recently this past weekend was replacing a ceiling fan, due to the fact the old previous fan, only the light worked, and not the fan portion, so I purchased another replacement fan, of a fairly cheap price approx. 20 dollars at the local Home Depot, and went home to mount it. I connected...

This will probably be the first of several posts. My house was built in the 70s, most likely by people on acid. :D I have removed my ceiling fan from the ceiling and the wires WERE as follows: Black to Black White to White Blue (fan) to Red (ceiling) My new fan (Hampton Bay Vercelli)...

Thanks in advance for anyone who can help me. I just moved into a brand new home and the Master Bedroom is pre-wired for a ceiling fan. It has two wall switches, one to control the light and one for the fan. The Hunter fan has a black, a white, a black/white and two green wires. The prewire...