 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Ceiling Fan won't turn off when using Timer on the Remote
I recently purchased the Mercator Grange Ceiling fan with Remote Controller (model FRM92) that has, LCD, Light Dimmer, Light Timer, Fan Temp and Fan Timer. When I set the Fan Timer say to 30min, the Fan does not stop spinning after 30mins but the Remote LCD shows the Fan speed being off. I have contacted Mercator and all they say is that there must be interference with the remote control frequency, however, everything else on the remote works OK... Has anyone else experienced this problem and was it resolved...
|
||||
Check out some similar questions!
Have a ceiling fan that has no pull chain and only works with a remote. Changed batteries and could not turn off fan/light in fan. Help. I am moving in two days.
I put a hampton bay fan remote on my fan and it worked great for a long time. Today while I was gone the fan was turned on and my father in law tried to turn it off by the pull chain and now it won't work at all, what should my next step be? All it says in the manual (which is now missing thanks...
Recently my 3-speed ceiling fan, which does NOT have a remote, won't turn off and only runs on high and low.
I have a Hunter ceiling fan. Always used the remote to turn fan on and off but my son disconnected the wires inside the remote and now I can not turn the fan on with the pull chain. The remote also controlled the lighting as well. Help! Thanks
I recently installed a 52" Hudson Bay Ceiling Fan But the remote will turn off and on the lights but not the ceiling fan,why?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
