I have a hampton breeze saratoga remote control fan with light. Off fan/light is blue, white, and black. Off receiver for remote on one side is blue, white, and black (to connect to fan). Off the other side of receiver is white (neutral) and black (hot). Out of ceiling is white, black,...

I removed a ceiling fan (Hampton Bay) which had a lower light also. The wires from the ceiling were 1black,1white ,1red and the ground. It was operated by 3 wall switches. One was for the fan and one for the light separately (these2 switches were next to one another), the 3rd switch was in the...

Hi We just bought an Aloha Breeze remote control fan. We put it up as directed as we have put up several fans in the past. This is our first try at one with a remote. The fan came with a hand held remote and the receiver. The wiring diagram that came with it is hard to see and there are no precise...

I am installing a Harbor Breeze ceiling fan with a remote control. The trouble I'm having is with the remote receiver. There are two wires that connect to the home wiring a white and a black wire. I know they connect to the white and black home wire, but I also have a home wire that is red, and I...

I have existing wiring and switches in which the two ceiling fans with lights were controlled by a switch and so were the fans. I am replacing both with remote control fans. My problem now is that the remote sensor on each fan only has a black and a white wire and from the ceiling are a black,...