I am trying to swap out a dual switch for a switch that has a dimmer for the ceiling fan light and a three position switch to control the fan. The original wiring had white to white on switch, black to black on switch, and one black from light connected to the top switch pole and the other black...

I have 1 single pole switch for fan, and 2 three way switches to run light only. The power in is by the double box that will house the fan switch and the #1 light 3way. The other box houses the other three way switch. My fan switch is turning the light on and off, the three ways are doing nothing....

Hi, I've read so many posts, but can't figure this out. (don't laugh) At the switch: The wiring from the wall has RED, BLACK, and GROUND (bare). The switch is a dimmer for both the fan and light. Wires are BLUE, RED, and BLACK. SO, how do I hook this up? At the fan: The wiring from...

I have a Hampton Bay ceiling fan with three wires emerging from the top: white, black, red, and green. Presently the white, black, and green are hooked up to a switch and the fan works fine. The red is capped. The fan also has a chain which I intend on keeping on the medium setting indefinitely. ...

I had to replace the flywheel on my Hunter ceiling fan and I had to remove the light kit that was attached. After I installed the flywheel, I forgot to mark the wires for re-connection. This is an older model fan. There are five wires coming from the fan motor--brown, blue, white, black and...