Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Adding a light kit to ceiling fan w/ light & dimmer switch
[ 6 Answers ]
I would like to add a light kit to a ceiling fan(cannot find a name on it) that is currently hooked and working up in our family room - since we moved in 6 years ago (house was built in 1991). I would like this to operate like our bedroom ceiling fan (which already has a light attached) and...
Trying to wire ceiling fan switch and 2-3way light switches for ceiling lht/fan combo
[ 5 Answers ]
I have 1 single pole switch for fan, and 2 three way switches to run light only. The power in is by the double box that will house the fan switch and the #1 light 3way. The other box houses the other three way switch. My fan switch is turning the light on and off, the three ways are doing nothing....
How to install a ceiling fan with a light and switch controlling the light and fan
[ 5 Answers ]
Hi, I've read so many posts, but can't figure this out. (don't laugh) At the switch: The wiring from the wall has RED, BLACK, and GROUND (bare). The switch is a dimmer for both the fan and light. Wires are BLUE, RED, and BLACK. SO, how do I hook this up? At the fan: The wiring from...
Stuck string on ceiling fan/light combo light side
[ 1 Answers ]
I have a ceiling fan/single light combo, and the pull string to switch on the light is stuck... How do I dismantle the light fixture part to get at the string?. Will I need to replace anything inside?
Installing a light kit on a ceiling fan where a switch enables both fan and light
[ 2 Answers ]
I have a Hampton Bay ceiling fan with three wires emerging from the top: white, black, red, and green. Presently the white, black, and green are hooked up to a switch and the fan works fine. The red is capped. The fan also has a chain which I intend on keeping on the medium setting indefinitely. ... View more questions Search
|