Hello, I just purchased a new pull chain switch for my ceiling fan light. The lead wires coming down are white and blue. The wires on the new switch are black, blue and red. Normally these are simple installs but I need help on how to wire these due to the different colors. Thanks!

Pull chain on the ceiling fan light broke off, so I pulled it down, and figured out what to buy, but at some point one of the two black wires going to it came loose, presumably out of a screw cap. Does it just go in the cap with the other black load wires (3 still together)? Do I understand...

The light pull chain broke in a ceiling fan so I bought a new whon need help wiring it in my grandmother forgot how they went back together, there's two wires running out of the light cluster(green)&(white). There two wires running out of the cieliing fan(green)&(white)also. But the new pull chain...

At one time a manufacturer made a helper lever to turn on a light on this kind of light but cannot seem to find it. It fitted right on the switch with an extension so it could be pulled on and would retract into the swith with out hanging up. Anyone lknow of this ltype of helper?

Hello all I need to replace the pull switch for the light for my ceiling fan. I have the part and took off the the cover to get at the part that holds the bulb where the wires are supposed to connect. The problem is that one of the old wires is no longer connected and I can't tell where I should...