 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Could be a bad wall switch, a disconnected wire in the ceiling box, a burned out bulb, no power to the wall switch. You will need to do a little troubleshooting with a VOM. Check for voltage to the switch, voltage through the switch, voltage at the light connection.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
New light put in my Hampton Bay ceiling fan, but then after a few days, no light bulbs work but fan runs fine, why is this happening?:confused:
I recently tried to help a friend install a Harbor Breeze ceiling fan w/ a light kit (this model 52" White Ceiling Fan ENERGY STARŪ) The fan has 4 wires: green, white, black, and blue. The house has 3 wires: green, white, and black. Per the instructions we hooked up the green to green,...
I have a Hunter ceiling fan with four lights. Then without anything unusual happening the fan and lights simultaneously stopped working. I operate the unit using a wall switch. When I turn the switch to "on" I can hear the unit beep so I know that power is going to it, but when I press the fan or...
I have a Hampton Bay Windward 11 Ceiling fan/light and the light is not working. Changed the fluorescent and it still doesn't work. Remote control works okay.
I installed a ceiling fan, but two of the four lights don't work. I replaced the light kit but that wasn't the problem. I have a two switch wall switch. I wired the white to white, black to black, blue to blue and ground to ground. Do you think the ceiling fan is defective?
View more questions Search
|
