I just bought I Home Essentials ceiling fan from K-MART and I wired the fan portion just fine. The wires were nice and color coded Black to black, red to red, white to white and green to bare copper for the ground wire. I turned on the power and it works fine. When I shut the power back off,...

I've been trying to figure out how to do this and I'm slowly getting there. I wasn't able to buy just the light switch itself, I had to buy the whole unit with one black wire and one white wire coming out top. I'm assuming that has to go back up into the fan unit but I'm stumped as to how I get...

I have recently replaced a ceiling fan with light kit with a newer model. I hooked up the wires from the new fan/light to the same wires in the ceiling box that the old fan was hooked up to. There are two switches on the wall plate, one for the light and one for the fan. When I hooked up the new...

I just purchased a Harbor Breeze 52in. Helix II Ceiling fan. The light kit came with the fan. There are 5 G9 blubes that came with the light kit. My problem is that the fan works properly but the lights will not come on. The instructions say to "connect the black wire plug from the fan to the...

I have a Hampton Bay ceiling fan - model CC 52HD. It currently has a light kit attached to it and I'd like to remove it, but need the "cap" that should fit over where the light kit currently is attached. Anyone know where I can find one of these? Are they standard?