Black, white and ground. What do I do with the extra red wire in the new light kit? I didn't have a ceiling fan nor do I want one. Thanks.

I am adding a Hunter remote control to my exsisting Hunter ceiling fan. All the wires match from the remote to the fan, and I've hooked them up perfectly. My confusion comes from the ceiling wires to the remote. My ceiling has 3 wires: white, grey and red. The remote only has two wires to hook them...

The ceiling box had a black wire, a white wire, a red wire, & a bare ground wire. I connected the black to black, white to white, ground to the ground on the fixture strap, & ignored the red wire. The light now works but not with the flip switch. It works with the round switch when it is turned to...

The house is on cement slab, about ten years old.

I have 1 single pole switch for fan, and 2 three way switches to run light only. The power in is by the double box that will house the fan switch and the #1 light 3way. The other box houses the other three way switch. My fan switch is turning the light on and off, the three ways are doing nothing....