Ask Experts Questions for FREE Help !
Ask
    holly1127's Avatar
    holly1127 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 21, 2014, 08:42 PM
    Can't seem to put in a new wall socket
    After finishing, I thought, installing a new GFCI wall socket I found it didn't work. I have pretty much tried everything except what will work. There is a light switch right next to the new socket. With the light on the last thing I tried was loosening the light switch enough so I was able using 2 separate wires I touched them to the terminals and to my shock, no pun intended, there is no power coming out even though the switch works perfectly well. I should mention that I got a wire to close to something and it sparked but the switch still works and I have light. I am truly at my wits end which would be fine with me but if anyone out there is married you know what I'm going through. HELP !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Thank you to anyone who submits some kind of solution whether it works or not.
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #2

    Sep 22, 2014, 02:27 AM
    but if anyone out there is married you know what I'm going through
    You just have to explain that, you just gotta. I am old and slow, I am also married, but I just don't understand. I am not an electrician but I have done a lot of electrical work and I don't see the connection. Maybe I have a short circuit, maybe I have a bad connection, or maybe I have been shocked to many times.

    Does it mean that married people share a common bond of being in the dark. Does it mean that being married is a big mystery like electricity? Does it mean that marriage, like electricity, can be very frustrating (I could agree with that).

    You explain that comment and I will tell you how to wire the GFI.
    joypulv's Avatar
    joypulv Posts: 21,591, Reputation: 2941
    current pert
    		  
    #3

    Sep 22, 2014, 02:46 AM
    I haven't been married for 20 years, but I know what you're going through.
    I too am curious about the connection.
    I think it has to do with being at your wit's end? Maybe your socket is trying to tell you something.
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
    		  
    #4

    Sep 22, 2014, 03:18 AM
    Okay, I'll chime in, married 49 years and the victim of many honey do requests.

    Please help us. "after finishing" - What did you finish?

    When you pulled the original receptacle, what wires were where?

    But most importantly, please tell us what you are trying t do.

    I reread your post. Are yo trying to get power to the receptacle? Did you fish the wall to install the cable?

    If you are trying to supply power to the receptacle from a switch, you can't unless there is a neutral in the box with the switch. I suspect that you light is supply power to the switch and it loops it back to the fixture. Be careful, the white wire attached to a switch is normally hot.
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #5

    Sep 22, 2014, 09:14 AM
    If you just installed a GFI, and there definitely is power (both hot and neutral), and it does not work, the most likely cause is you miswired the GFI itself.
    You must have the incoming power connected to the line terminals, and be the correct polarity (hot to hot/gold and neutral to neutral/silver). A GFI will not work if it is wired incorrectly.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Outdoor wall socket [ 4 Answers ]

The connection of two extension cords fell in the pool when using a tool, and now the outdoor wall outlet no longer works. What can I do? Thanks. G

1 socket on chandelier blew out, but socket appears to be fixed by rivet; how change? [ 1 Answers ]

I've moved this Williamsburg-style brass chandelier from home to home with us. Last moved it in 1992. It uses small base bulbs, one of which just blew out after I tightened all of them, then restored power. Bulb component broke off from base and I removed base by twisting with a longnose plier....

How do I splice the wires in the attic to put a light and a plug socket in the attic [ 3 Answers ]

How do I splice wires in the attic to install a plug socket

Wall socket plug in chargers [ 3 Answers ]

I just heard on the T. V. that I am "waisting " (using) energy if I don't unplug my plug-in charger for, e.g. cell phone, rechargeable flashlight, etc. How can that be if I don't have any of these appliances plugged into the charger, drawing current to the appliance?

Double duty wall socket [ 1 Answers ]

When tackling my last problem (btw thanks guys!) I discovered that one of my wall sockets had a third wire (extended circuit) coming off the socket. They doubled the wire on two of the connection screws and ran a line into the side attic (Cape Cod house) to light the attic. When I was replacing...

View more questions Search