Mine is doing that + 60v AC from the cable box! Any clues? TV still works, but the cable technician did get a shock from it. Seems to have abated since I connected a new ground wire, but no apparent short circuits (no blow fuses anyway). Input from pole shows no voltage in the shield. I had assumed...

I am going to test my 6000 watt generator. It is recommended that I ground it to a copper rod driven into the ground. I alread have a copper rod that is used to ground my telephone and cable lines. Can I use a length of coax cable to run from my generator ground to the copper rod?

We installed an antenna next to our trailer on a mast pole. The coaxial cable we used had a gound wire in it but we didn't use it. We grounded the pole to a grounding rod in the ground and connected copper wire to it. We didn't connect the ground wire inside the cable at all. Is this a mistake?

Hi, Folks! I've posted on here before about an open ground, so don't mean to be a bore - but this is another issue. Sorry for the long preamble I'm about to give, but thought some background might help before my question: I recently installed a GFI combination outlet / switch (to a vanity...

I have 2 old circuits in my home that consist of the old nickel plated copper in BX cable with no ground. My question is... I have heard (from an electrician) that this older BX has a very long "PATH" to reach the overcurrent protection device should the hot wire become exposed and make contact...