Ask Experts Questions for FREE Help !
Ask
    tcamp's Avatar
    tcamp Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 10, 2010, 05:00 PM
    Can I use a light kit to replace existing lights?
    I have a Harbor Breeze model 7850544 ceiling fan with the 3 little lights. They don't provide much light and I'd like to change the lighting part and keep the fan. Can I use a ceiling fan light kit or is that only for fans that aren't purchased with lights?
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #2

    Dec 11, 2010, 03:59 AM
    Most light kits are interchangeable.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #3

    Dec 11, 2010, 08:49 AM
    As long as the fitting is the same diameter, you can use pretty much any light. They usually screw to the fan base adapter with 3-4 screws. Once the light is down, there will be 2 wires, black and white. Make sure power is off and remove the light ***'y. Take it to HD or Lowe's or a lighting supplier and match the base size and screw pattern for the one you may want. Reverse to reinstall.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #4

    Dec 11, 2010, 11:36 AM
    Comment on ma0641's post
    Guess I won't abbreviate assembly again!
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How do I add one can light for shower to existing switch which already has two lights [ 2 Answers ]

I added a new ceramic shower stall in bathroom also installed new can light for shower lighting. In this bathroom two lights already exist and do work. I connected 12/2 wire to new can light and ran it down the wall to wire into existing switch but can't get it to work right either the existing...

Ceiling fan doesn't work after lights on light kit blew [ 3 Answers ]

I have a ceiling fan and light kit installed with a remote. I have installed many fans and have actually installed this particular model over 10 times. My fan and light and remote were working fine for approximately 5 months. Last week I came into the room one morning, turned on the light...

How to replace vanity light on existing mirror with hole [ 3 Answers ]

I want to replace the 3 "hollywood" bar lights that are each 4' long in our master bath. Want to replace with a newer style vanity that has a 5" circular mounting. The existing mirrors (3) each had a bar light. I have successfully removed the original lights. The bar lights were "double-sided foam...

Adding light kit to existing ceiling fan [ 3 Answers ]

I just moved into a house built in 2004. I am attempting to install a basic ceiling fan light kit with a pull chain to the ceiling fan on the patio leading from the dining area. I have followed the below referenced five (5) steps exactly and cannot obtain any lighting from the new ceiling fan...

Adding lights to existing exterior light circuit [ 1 Answers ]

I have a light fixture that is flush mounted in the ceiling of an exterior porch, I would like to add two more twin bulb floodlights switched by the existing switch if this is okay to do. If so can I run wiring from the current fixture through conduit along the undersides of the eaves, and if so...

View more questions Search