I just replace my kitchen light with a new ceiling fan w/light. I now was going to try to install my hunter ceiling fan & light control switch. The switch has a black, blue and red wire w/green ground. The wall outlet has a black, red and white wire with ground. I just wasn't sure which wires...

We took down old ceiling fan with light kit and want to replace with fan with no light kit. However, we want to run a separate track light system from the ceiling fan power to track light fixture 5' away and want to use the double wall switch for both that we used for the old ceiling fan.

I have 1 single pole switch for fan, and 2 three way switches to run light only. The power in is by the double box that will house the fan switch and the #1 light 3way. The other box houses the other three way switch. My fan switch is turning the light on and off, the three ways are doing nothing....

Hi, I've read so many posts, but can't figure this out. (don't laugh) At the switch: The wiring from the wall has RED, BLACK, and GROUND (bare). The switch is a dimmer for both the fan and light. Wires are BLUE, RED, and BLACK. SO, how do I hook this up? At the fan: The wiring from...

I have a Hampton Bay ceiling fan with three wires emerging from the top: white, black, red, and green. Presently the white, black, and green are hooked up to a switch and the fan works fine. The red is capped. The fan also has a chain which I intend on keeping on the medium setting indefinitely. ...