Can main service feed lines be spliced to move a service box

Jkicks Posts: 1, Reputation: 1

New Member

Mar 1, 2011, 09:22 AM

Can main service feed lines be spliced to move a service box

tkrussell Posts: 9,659, Reputation: 725

Uber Member

Mar 1, 2011, 01:35 PM

Yes, but without more detail from you I cannot provide more detailed answer.

creahands Posts: 2,854, Reputation: 195

Ultra Member

Mar 1, 2011, 07:05 PM

For sure, if spicing, must be done in a box. As TK said need more info

Chuck

Add your answer here.

Check out some similar questions!

Is Schedule 40 conduit appropriate for main feed wires into a 220 amp service panel [ 4 Answers ]

I was told by a industrial plant electriction that schedule 40 was not exceptable and I must use schedule 80 pipe to my panel from the meter housing, but that does not seem to be correct for residential? I have visited many new construction projects in m,y area that all have used schedule 40 AND...

Can I tapinto the line side of a100 amp main breaker to feed a 60 amp breaker service [ 1 Answers ]

Can I tap into the line side of a 100 amp main breaker to feed a 60 amp breaker for a electric stove

I grounded the outdoor power service box, do I need to ground my main panel as well? [ 3 Answers ]

If I do, then what gauge of wire should I use for grounding my main panel? Is there any difference if I connect the ground to sewage pine or water pine? Thanks.

200 AMP Electrical Service Feed Wire Size/Type [ 1 Answers ]

Good Morning, I live in the Chula Vista, CA area. (San Diego). I built a granny flat. I have a 400AMP underground service from the street to a 2 meter base on my existing home. 200 AMPS for the front house on one meter, and 200 AMPS for the rear house on another meter. There are two, 200AMP...

Main Service Panel needs [ 9 Answers ]

I ran across this site accidentally today and found someone who had many of the same issues I need help with. Most of my questions were answered reading the forum however I have one more, using the following information I am hoping someone can help. The existing house is apx. 2300 sq ft w/a 200...