I want to replace a ceiling light fixture with a ceiling fan w/light kit. The light is on a 3-way circuit. The fan came with a UC-9050T wall remote. What I would like to do is control the fan light kit with the 3-way switches and control the fan with the remote. Is this possible? If so, how? Thank...

I have a Ruud Silhouette II Gas Furnace. The whole unit is turned off/on by a light like switch. The AC is working, but the heater is not. It appears that no gas is flowing to the burner. The PWR light is on, steady. The OK light is flashing; three times on, then off. The Flame light is off in...

I need to install a ceiling light in our bedroom. I have a single light switch and four outlets. One of the outlets is operated by the light switch. I have the following wires coming into the light switch box: three white wires/capped, three copper ground, three black/capped with a fourth pig...

I'm looking to have two Motion Sensor on one circuit. Long walk and want one sensor at both ends. The Sensor I'm using: http://rikain.com/Manuals/Intruder_alarms/Lynteck/ES34.pdf Also Note the Sensor I'm using allows you to switch it 'off' and 'on' quickly in order to override the sensor and...

I just install circuit breaker 240 v ,but when I use the meter it can only read 120 v on each pole when I check both pole I don't see any thing in the meter,:eek: why is this happen Thanks