Ask Experts Questions for FREE Help !
Ask
    carlf1955's Avatar
    carlf1955 Posts: 3, Reputation: 1
    New Member
     
    #1

    Jul 16, 2010, 02:23 AM
    Can I connect single ph to 3ph power outlet
    Can I connect single phase to a 3 phase outlet
    carlf1955's Avatar
    carlf1955 Posts: 3, Reputation: 1
    New Member
     
    #2

    Jul 16, 2010, 02:28 AM
    Can I connect single ph machine to 3ph power outlet
    I have a single phase welding set and only 3 phase power points can it be connected to these power points?
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
     
    #3

    Jul 16, 2010, 02:36 AM
    Yes, only need to use two of the three live legs of the three phase circuit.
    carlf1955's Avatar
    carlf1955 Posts: 3, Reputation: 1
    New Member
     
    #4

    Jul 16, 2010, 05:09 AM
    How do I connect a single phase weldind machine to a 3 phase socket
    I have a single phase welding machine how do I connect to a 3 phase power point
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
     
    #5

    Jul 16, 2010, 01:54 PM
    I merged posts since they are related.

    OK if you need detailed instructions, then we need detailed explanation of what you have, wiring method, type of building, something.

    I gave you the short answer, matched question.

    Pictures help greatly.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Outlet has no power.no gfi there are 5 outlets all together all of them are single wi [ 1 Answers ]

There are 5 outlets all together. They all are single ran wire. No gfi at all. The first and the last two work.what would cause the other two not to work? No power in the two lines.

Desktop will not connect to LAN on one particular outlet, but other PCs will connect [ 1 Answers ]

I am very puzzled and without a clue as why one of my PCs will fail ("A network cable is unplugged") to connect to my LAN using a particular outlet, but if I connect another PC, as a notebook, on the same outlet there are no LAN connection failures. Yet if I connect the desktop to another outlet,...

Electrical partial-power-loss power to the outlet on one side and the ground [ 2 Answers ]

I have partial-power-loss as a result of a heater and christmas tree plugged in the same line in my home. The problem I 'm having is that each outlet that was affected still has 115V on ether side and ground , is this the result of a hot attaching itself to ground somewhere in my wall? And how...

Wire Motor for 220 outlet Power from 110 power [ 1 Answers ]

I need to wire this sander for 220 power and do not understand the diagram well enough. Currently I believe it is wired for 110 shown in picture. Please advise about correct wiring for 220. Thank you 2 attachments

Single Outlet Not Working [ 2 Answers ]

I have one outlet in my kitchen that is not working. I have checked the breaker box and nothing was tripped. There isn't a "reset" button to push, I am at a lost what to try next or even what could be wrong with the outlet. Any ideas?


View more questions Search