Ask Experts Questions for FREE Help !
Ask
    stevahnyo's Avatar
    stevahnyo Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Dec 5, 2013, 07:19 PM
    Bypassing Sump Pump Switch
    The float switch on my sump pump broke off inside the switch, so I bought a separate float switch that plugs in through the outlet of the sump pump. However, I need to bypass the old switch. Coming out of the switch where two black wires, one white, and one red. In which way do I cap them off to put that switch in the "always on" position?

    Thanks!
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
    		  
    #2

    Dec 6, 2013, 06:35 AM
    Can you at least supply the make and model number of the sump pump, please?
    stevahnyo's Avatar
    stevahnyo Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Dec 6, 2013, 10:01 AM
    Quote Originally Posted by donf View Post
    Can you at least supply the make and model number of the sump pump, please?
    Wayne
    1/3 HP pedestal sump pump,
    120V, 60Hz, 5.7AMP
    SPV500
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
    		  
    #4

    Dec 6, 2013, 11:05 AM
    Go to waynepumps.com - The manual is there. Unfortunately, it does not give the internal connections of the switch.

    I want to understand what's going on so work with me. Your float rod broke, so you bought a new float kit, but cannot attach it to the top of the switch?

    Or the new kit has a switch with it that you are trying to use on the exiting pump? Is it at all possible to just swap out the float rod and not use the new switch?

    Maybe one of the plumbers that look at this site can help you.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Well pump,furnace,sump pump [ 1 Answers ]

Is it possible to connect hard wired devices to a portable generator avoiding a transfer switch or some other device connected to the main circuit breaker box?thanks in advance

Bypassing a door switch [ 0 Answers ]

I bought an eocaire window pellet stove last year. Went to start it up this year and the safety switch light stays on and the auger won't run whenits on, how can I bypass the door switch?

Sewer ejection pump for a sump pump? [ 7 Answers ]

My sump pump for sewage had water pumps installed instead of sewer ejection pumps... is that OK?

My sump pump won't turn off after it has pumped the water out of the sump pit [ 2 Answers ]

My sump pump is only 3 years old and it won't stop running after it has pumped the water out of the sump pit. What do I do to fix this? Is there a switch that I have to adjust? Please help.

How many holes should the basin of the ejector sump and how many for the sump pump? [ 3 Answers ]

I have two different wells, one holds my ejector pump and the other one holds the sump pump. I recently was getting water in my sub basement and it was coming from between the basin w/ejector pump and the concrete. Once we drilled a hole in the basin the water drains from the concrete into the...

View more questions Search