Ask Experts Questions for FREE Help !
    fidget's Avatar
    fidget Posts: 1, Reputation: 1
    New Member

    Oct 15, 2006, 10:14 AM
    Blue wire connected to white or black?
    I was given a Hampton bay ceiling fan but no installation manual. Does the blue wire get connected to the white or black house wire?
    labman's Avatar
    labman Posts: 10,580, Reputation: 551
    Uber Member

    Oct 15, 2006, 01:31 PM
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member

    Oct 15, 2006, 01:54 PM
    Yes. For future reference:

Not your question? Ask your question View similar questions


Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.

Check out some similar questions!

How I fixed my RTH230B 'blue wire' [ 5 Answers ]

Hi All, This seems like the hottest place for Honeywell RTH230B questions, so I thought I would post what worked for me after much reading on this forum and troubleshooting. My old thermostat had five wires: read, white, yellow, green, blue The Honeywell connections for: Rh, Rc, W, Y, G ...

Neutral wire is hot(has voltage potential like the black wire) [ 5 Answers ]

Hi, The problem started at midnight last week. One of my line in the basement is starting to have issue whenever I connect a water pump or appliances to the outlets. Before I plug the appliance in, the neutral is neutral(zero voltage), but when I plug the appliance in, the neutral is now...

Blue, Black and White wires in celing fan [ 2 Answers ]

I removed a ceiling fan to replace a switch but did not note the wires. Now I want to replace the fan but find it has Blue, Black and White wires, whereas the wires coming from the ceiling are only White and Black. It also has a green wire attached to the casing. Does the blue and black wire...

2 Wire White-Rogers with no wallplate wire question [ 2 Answers ]

Hi there. I want to replace my current White-Rogers 1E56W309 thermostat with a new Honeywell RTH7500D. The problem is that the tools that installed my high efficiency furnace didn't install the wall plate with my thermostat (it was a new house and the builder contracted these guys). Instead,...

Installing Honeywell RTH230B, what to do with blue (B) Wire [ 0 Answers ]

I am trying to install of Honeywell RTH230B thermostat. I removed the old Lux mercury thermostat and their were five wires Rh, W, Y, G, and B (blue). The thermostat has place for all of the wires except the B(blue) wire. Do I need a different thermostat or can the B wire be put in the Rc space...

View more questions Search