Ask Experts Questions for FREE Help !
Ask
    SkippyNC's Avatar
    SkippyNC Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 2, 2010, 11:35 AM
    Ask motion detector question
    I am trying to control my walkway lights with motion sensor.
    I am using 3 walkway lights (each 12V / 18 W, bulb model # 1141) powered by Malibu 100 Watt Power Pack (from HomeDepot -

    http://www.homedepot.com/h_d1/N-5yc1...talogId=10053).

    Motion detector controls 120VAC feeding the transformer.
    System works for few days, sometimes weeks, before either transformer burns out or motion detector dies.


    Something is mismatched. I suspect that load on the motion detector is not big enough and this causes internal triac (or whatever semiconductor is controlling the output – it is not a relay) to die.

    I tried to control instead a 120V AC relay with the motion sensor but load is definitely too small and it never triggers.
    Any ideas other than add more lights to the output of the transformer or use bulbs with more wattage?

    I am thinking that if I could find a motion detector with relay output then I could either control the primary or secondary part of the transformer without worrying about load being too small.
    I have no problem using different parts if this is going to fix the problem permanently.

    Any suggestions will be appreciated.

    Thanks.

    <Added URL tag and line breaks for readability - KISS>
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #2

    Jun 2, 2010, 12:25 PM

    Add a 10W resistor around 2K to either circuit. In parallel with your relay coil or in parallel with the transformer.

    Use a 2000 (2K) to 2500 ohm >=10W chassis mount or lead resistor from DigiKey Corp. | Electronic Components Distributor | United States Home Page will work. I can't directly post the search terms.

    The relay method will be the safest.

    If you want to use a solid state approach, a zero turn on SSR with the resistor on the input side and POSSIBLY the output side should work. Digikey p/n EZ240A12-ND
    Missouri Bound's Avatar
    Missouri Bound Posts: 1,532, Reputation: 94
    Ultra Member
    		  
    #3

    Jun 3, 2010, 07:31 PM
    Your transformer burns out? I think you are on the right track to switch the secondary, not the primary. Have you considered X10 technology? They have wireless motion sensors which switch X10 devices using a relay.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Motion Sensor Question [ 2 Answers ]

I have a 100+ year old house with updated electrical on the lower level. I also have a motion sensor alarm that I arm every night as I go to bed. My lights down stairs have been turning on during the night. I have no explanation for it. I would like to reject the notion of a ghost as I've lived...

Question about filing a motion [ 4 Answers ]

This insurance company is trying to sue me for an accident my mother had in my vechile in 2005. My mother didn't have permission to even drive my vechile at the time of the accident. And I really don't know what to do.

2 wire motion detector [ 3 Answers ]

Does anyone know if there is a 2 wire exterior rated motion sensor available? No neutral wire available. 120 volts. Thanks

Motion Detector to Sprinkler transformer question [ 3 Answers ]

Hi, I want to hook a sprinkler valve up to a motion detector. The motion detector (Heath Zenith SL-5316) will put out "up to" 500W, and 4.2A (120 VAC). The sprinkler valve (Orbitz 57020) requires 18VAC min, but is spec'd at 24VAC to draw 0.35A when it switches and 0.23A when it is holding. ...

Simple Rotational motion question [ 1 Answers ]

I've been getting help from sparknotes.com and I've come across an example that has stumped me. The page is at http://www.sparknotes.com/testprep/books/sat2/physics/chapter10section4.rhtml I'm at example 2 (toward the bottom of the page). The problem comes when they use Newton's second law...

View more questions Search