Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Adding light kit to existing ceiling fan
[ 3 Answers ]
I just moved into a house built in 2004. I am attempting to install a basic ceiling fan light kit with a pull chain to the ceiling fan on the patio leading from the dining area. I have followed the below referenced five (5) steps exactly and cannot obtain any lighting from the new ceiling fan...
Adding a new light with its own pull string to existing light and switch
[ 8 Answers ]
Howdy. I have a 50 year old house where the bathroom light shares a common wall with the back of the master bedroom closet. I want to add a pull string light in the closet and tap the power off the bathroom light. The bathroom light is switched and the power comes first to the light and then...
Adding new light fixtures to existing switch
[ 4 Answers ]
I am trying to add 3 pendant lights to the same switch as a light in the room. The power source runs to the light first, then to the switch. I tapped into the wire from the switch to the light. I connected whites to whites, blacks to blacks, and grounds to grounds. Now the pre-existing light...
Adding lights to existing exterior light circuit
[ 1 Answers ]
I have a light fixture that is flush mounted in the ceiling of an exterior porch, I would like to add two more twin bulb floodlights switched by the existing switch if this is okay to do. If so can I run wiring from the current fixture through conduit along the undersides of the eaves, and if so...
Adding Shower to Existing Tub
[ 1 Answers ]
Hello, My wife and just bought our first home, actually, we're closing on it this Nov. 29th, and our first project involves installing a shower head. The home we purchased is over fifty years old, and the woman who was living in it, only had a tub and faucet. So, we'll need to add plumbing to... View more questions Search
|