Ask Experts Questions for FREE Help !
Ask
    tbc007's Avatar
    tbc007 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 24, 2011, 11:01 PM
    Adding led spot lights to a circiut
    Circuit already has 7 lights and 7 outlets. One light is a sealing fan.
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
    		  
    #2

    Feb 25, 2011, 07:48 AM

    We need more information from you, please.

    What is the amperage for this circuit?

    Because you have a ceiling fan installed you may already be pushing the max limit of the circuit amperage, particularly if the circuit is 15 amps.

    While there is no restriction on the number of outlets (lighting or receptacle) in a residence, there is a common sense number, usually between 10 or 12, depending on the circuit load being serviced. You already have 14.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Led lights [ 1 Answers ]

Can an already in use dimmer switch be used on the new led lights?

LED undercabinet lights [ 1 Answers ]

Home Depot's Hampton Bay 3 puck undercabinet light set comes with an extension line to wire up to 6 pucks on one transformer. The ends of the line are slightly dissimilar and will mate only with either the input or output socket, not both. Does this indicate a required polarity or what? I want...

Solar LED lights [ 1 Answers ]

I bought a set of 6 Hampton Bay low voltage solar LED lights and now 2 of the lights will not work. The rechargeable batteries work but the lights will not illuminate. How can I fix them or replace the LED? Where can I get LED bulbs?

LED lights [ 1 Answers ]

I just purchased a few LED screw-in light bulbs. Now when ever I turn off the wall switch, the LED light is dimmed but not off. In these same fixtures with an incandescent bulb, the light goes completely off. How do I solve this problem? The house was built in 1979 with 3-wire 12 gage.

View more questions Search