 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Adding a ceiling fan/light combo
The wires in the ceiling from the previous light are 3 black all together, none attached to the light, 3 white all together to one white from the light, and 1 red going to a black from the light. THe fan has a blue, black, white and green. Where do they all go.
|
||||
|
||||
|
Attach black from fan/light to 3 black. Attach white from fan/light to 3 white. Attach blue from fan/light to red. Connect all bare and green together.
Pull pull chain will control fan. Wall switch will control light (with light pull chain switch on). |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Trying to install a ceiling fan with a light. The ceiling box had 2 sets of wires. One set has a black and a white wire where the other has black, white and red wires. I connected the black from the 3 wires to the white from the two and then aligned the rest with same color (except red went...
Greetings, Wiring a new home and was going to run 14ga to the 2nd flr branch as theer are only 14 fixtures with a 75watt max capacity. Soon realized 4 of these fixtures are fan lights combos. What do I figure as for wattage per fan motor or is there a wattage I should use for the fixture as a...
I have 1 single pole switch for fan, and 2 three way switches to run light only. The power in is by the double box that will house the fan switch and the #1 light 3way. The other box houses the other three way switch. My fan switch is turning the light on and off, the three ways are doing nothing....
I have a ceiling fan/single light combo, and the pull string to switch on the light is stuck... How do I dismantle the light fixture part to get at the string?. Will I need to replace anything inside?
I need a 220v ceiling fan/light combo fixture to take to Europe. ( hard to find where I go ) Any suggestions where to buy one in the States? :cool:
View more questions Search
|
