I have a circuit with a single switch connected to four outdoor lights. I would like to add two motion sensors so that either of them will trigger the lights to go on. Can someone please help me with suggestions and/or a wiring diagram? The motion sensors I have are like this one: Link. They...

I'm having problems with connecting a 2nd light fixture to one motion detector. The motion detector is rated to 500 watts and has 2 lights. Because of the lack of coverage I wanted to add a 2nd light fixture to flip on when motion is detected. When I connected everything together, the 2nd light...

I have an NEW light outside above my garage door. I would like to add a motion detector, perhaps adjacent to this light. My old light was easy because the detector I bought had two parts, one the detector itself which I attached adjacent to the light, and a part which screwed in to the standard...

I have three exterior lights, which are controlled by one switch inside. I would like to add a motion sensor to control all three lights. I don’t want to use the inside switch anymore. Is it possible to add the motion sensor and if so where should it be added. Could someone please give me detailed...

I want to construct a motion detector that will fire lights and a horn on a car grill and fender for a halloween effect. I only want it to last 3 -5 seconds then turn back off. Can you help me with a design?