I just recently replaced a 4-wire (3-speed) Ceiling fan switch on my ceiling fan. The chain had broken off inside the switch. After installing the new switch, the fan wouldn't turn At all. I have tried the swithes at all speeds And even went out and purchased another switch thinking the first...

Hello, I just purchased a new pull chain switch for my ceiling fan light. The lead wires coming down are white and blue. The wires on the new switch are black, blue and red. Normally these are simple installs but I need help on how to wire these due to the different colors. Thanks!

At one time a manufacturer made a helper lever to turn on a light on this kind of light but cannot seem to find it. It fitted right on the switch with an extension so it could be pulled on and would retract into the swith with out hanging up. Anyone lknow of this ltype of helper?

First I want to say thanks for the help so far. I had to replace the pull chain switch in a Hampton Bay fan. I was unsure of the wire configuration and was able to find some helpful information to get me started. I have installed the switch and the fan now works on all 3 speeds, but it will not...

I just replaced the broken pull chain switch on a ceiling fan. There were two black wires coming from above the light socket. Either way I attached them to the two black wires coming from the pull switch worked. Does it matter which goes to which if they work either way?