 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
The 3 speed remote on my Avian no longer works.
I have 2 Avian ceiling fans Model #L05BN... both worked great for about 1 year. Then1 of them would not operate with the remote so I changed the codes so the would both work off 1 remote... worked great for 1 month... now both fans on high speed and 1 light working... I have no control a all anymore... except to turn off the breaker panel.
The batteries appear to work as the light on the remote lights up when operated... is this a common problem and how can I fix? Is there a way to reset the remotes or re-sinc each fan separately again? |
||||
Check out some similar questions!
I ran out of replacement light bulbs for my Hamilton Bay ceiling fan which operates by remote control. I didn't pay attention when I purchased the new light bulbs that although they looked the same, the bottom part that is screwed into the socket was slightly different. I had turned off the light...
It's a model 138-498 St. Regis
My Hampton Bay remote no longer operates the fan and since that is the only way to operate the fan, we cannot use the fan at all. The remote has relatively new batteries and the light works fine. What can be done to fix the problem? The serial number for this fan is: 0000 893 and we purchased it...
All of a sudden last week the remote stopped working on my Hampton Bay fan.. (model: #55295, 54 inch Brushed Steel w/Remote) Things I have done: 1) Replaced the batteries in the remote 2) Ensured the dip switches match on the remote and the fan 3) Ensured there is power going to the fan ...
I installed this fan OK... it was fine for 2.5 years now the remote only works the fan speed. It does not work the lights. I removed the fan and checked connections which are good.Luckily the fans lights are in the on position and POWER is through a wall switch,that controls the lights. But I wish...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
