 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
277/480 load after transformer = to 120/208 load feed
I have a 800 amp 120/208 3P stand up section that feeds a step up 90kva transformer and the loads are nearly equal? I thought that after the transformer the load of 277/480 would be drawing less. We have about 500 amps per phase being drawn in front of the transformer and the load at the sub panel it feeds is about 480 amps. Is this normal?
|
||||
|
||||
|
Need to know if the 800 A switchboard is only feeding the 480 volt transformer. I suspect not, that there are other loads in addition to the transformer.
Are you sure the 120/208 section is feeding the transformer, and not the other way around? While it is possible to be using the transformner to step up the voltage, and it not that rare, it is not that common. |
||||
Not your question?
Ask your question
View similar questions
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Latent Heat Load - HVAC Load Calculations
[ 5 Answers ]
Can someone tell whether latent load contributes to the total cooling load of a building or not.if it does, tell which way, and how it should be looked at during load calculation of a building.Also if possible display a perfect, easily understood definition of latent heat.Thanks
How to load feed in weed eater
[ 3 Answers ]
I don' know how to put the line in the weed eater. Can someone help? Thanks.
Can't load my os
[ 2 Answers ]
My friend purchased a brand new hard disk of 80 gb . Thing is that I formatted and partition it in my system n copied few files to his hard disk . N when he went home n installed the hard disk in his system to load xp os . The bootable cd loads n when it says starting to load i.e before...
View more questions Search
|
