Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
We are adding a breaker box in a barn the wire we ran from the pole breaker box
[ 1 Answers ]
The wire is 2 ft short and the box will be too low... can I splice another piece to it? And how do I do it
50 amp 240v service to barn
[ 5 Answers ]
I am having a new barn built and have a question about running the electrical service. The barn is 325' away from my main panel at the house. The barn service will be 50a 240v. I am planning on trenching 2/0 quadplex aluminum URD from the house. In the barn I plan on enclosing the cable in...
100 Amp Service to Barn?
[ 5 Answers ]
I am confused on the proper ground and bonding here is what I have: 100 amp disconnect coming off Meter (2 hot, 1 common), then 4 wires to the 100 amp panel in barn (2 hot, 1 commmon, and 1 ground). My question is do I bond this ground to the common at the disconnect and then connect to the added...
Can I tapinto the line side of a100 amp main breaker to feed a 60 amp breaker service
[ 1 Answers ]
Can I tap into the line side of a 100 amp main breaker to feed a 60 amp breaker for a electric stove
200 amp extension to barn
[ 6 Answers ]
I currently have a separate 200 amp box on my house that has been extended to the other side of the house through the attic and is stubbed out in a service box, and it appears to be a 4 wire URD cable.. I want to run it underground about 100 feet to a barn. Can someone please give me instructions... View more questions Search
|