Ask Experts Questions for FREE Help !
Ask
    clsmooth's Avatar
    clsmooth Posts: 3, Reputation: 1
    New Member
     
    #1

    Nov 8, 2009, 07:20 PM
    Three-phase transformers formulas.
    I have two three phase rnasformers connected by a transmission line. I know transmission-line impedance is j100 ohms, and the load impedance is 4+j1 ohms. I need to find the generator current, the transmission-line current, the load current, the load voltage, and the power delivered to the load.

    I do not know the formulas I need to use to calculate each of the previously stated currents and power.
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
     
    #2

    Nov 9, 2009, 06:46 PM

    Been a while, but I think you can assume that:

    1. transmission line Z is a lumped Z
    2. Generator output is Vs @ 0 deg is going to be a complex voltage source

    You have a series circuit consisting of 100J and 1J

    I think you do Kirkcoff's law assuming a complex voltage source.
    and a complex current.

    e.g. Vs @ x deg = (4+101j)*I at y deg

    Since Vs is the reference, assume 0.

    Power is V*I * cos theta

    It's been a while. Like 35 yrs.

    SO, find V @ 0 deg and find I t theta deg and do the math with the parts.

    Homework, I'm sure.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

What's more energy efficient single phase or 3 phase and what's harder on the equip? [ 18 Answers ]

Hello, I would like some advice from anyone willing to offer. I'm starting an ice cream business and I'm collecting used soft serve machines. Apparently, there are used machines configured for single phase and 3 phase 208V 240V etc... I would like to know which phase a voltage is more economical...

3-phase transformers [ 0 Answers ]

Consider a system with the one-line diagram shown below. The three-phase transformer nameplate ratings are listed. The transformer reactances are given in percent: 10% = 0.1 p.u. The transmission line and load impedances are in actual ohms. The generator terminal voltage (magnitude) is 13.2 kV...

How am I going to size my 3 phase X'mer with 1 phase load using current as reference [ 3 Answers ]

Hi, I'm Peping: I have 90 pieces of single phase loads with current of 2 Amperes. This will be loaded to a 3 phase transformer, Wye connected having a line to line voltage of 220 Volts. What will be the size of the transformer required for the mentioned loads? Many thanks, Peping

Calc. Empirical formulas and molecular formulas [ 1 Answers ]

:eek! : a sample is made of 18g of C and 81.5g of H... the molecular mass of the compound is 104g/mole calc. the empirical formula... calc. the molecular formula OK.. so I got the moles, I think.:confused: . C= 18g X 1mole = 1.4987g 1 ...


View more questions Search