Ask Experts Questions for FREE Help !
Ask
    fahimali's Avatar
    fahimali Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 24, 2012, 09:44 PM
    Digital circuit
    A computer needs to control a robot, where the computer sends the following commands:

    Do nothing


    00

    Turn right


    01

    Turn left


    10

    Move forward 11



    You have to design a circuit that accepts these commands and sends the robot the following signals

    Do nothing


    000


    Turn right


    001


    010


    011

    Turn left


    101


    110


    111

    Move forward 100


    100




    So they respectively take 1,3,3 and 2 clock cycles. Until the current command is completed, don't take a look at the next input from the computer.

Check out some similar questions!

I have a Murray circuit breaker panel and want to add a circuit for a 3 prong elec dr [ 3 Answers ]

I have an electric 3 pronged dryer that I want to add a circuit for on my Murray Circuit Panel. What kind of switch do I need?

Replace non digital thermostat (2 wire) to new Digital termostat (2 wire) [ 0 Answers ]

Hi: I bought an new digital thermostat, White-Rogers 1E78-140 millivolt to replace a two wire non digital millivolt thermostat. The two wires are to be attached to "W" and "RH" on the White-Rodgers thermostat. The wires are connected at the stove at "TH" and the other to the wire coming from...

Replace non digital thermostat (2 wire) to new Digital termostat (2 wire) [ 2 Answers ]

Hi: I bought a 2 wire, heating only, millivolt thermostat to replace a non digital 2 wire thermostat. The replacement thermostat is a White-Rodgers 1E78-140 (heat only, non programmable millivolt compatible). For two wires "W" and "RH" are used in the thermostat. Does it matter which wire from...

Replace non digital thermostat (2 wire) to new Digital termostat (2 wire) [ 0 Answers ]

Hi: I bought a 2 wire, heating only, millivolt thermostat to replace a non digital 2 wire thermostat. The thermostat wires from the stove are connected to "RH" and "TH/TP" . The terminals in the new thermostat are labeled "RH" and "W". "TH" wire from the stove would be connected to what...

Changing from non digital thermostat to digital [ 1 Answers ]

I have an old non digital Honeywell T87F thermostat, gas burner with baseboard water heat. Can I change to a new digital Honewywell RTH230B and how? Thank you

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.