If you have a residential 120/240 single phase service with a perfectly balanced load

confusedalot1 Posts: 2, Reputation: 1

New Member

Sep 23, 2010, 03:49 PM

If you have a residential 120/240 single phase service with a perfectly balanced load

I do not understand this concept

tkrussell Posts: 9,659, Reputation: 725

Uber Member

Sep 24, 2010, 02:38 AM

Use more words to explain what you need.

Add your answer here.

Check out some similar questions!

240/120 volt single phase (80 amp load) underground 180 feet [ 1 Answers ]

What is the recommended wire size to allow the use of either 2 hp radial arm saw or a stick welder plus 20 amp continuous lighting load.

Service panel is 120 two pole when I check phase to phase I don't get 240 [ 1 Answers ]

Service panel is 120 two pole when I check phase to phase I don't get 240

Advantages of a 480/277 3 phase Volt system over a 120/240 [ 2 Answers ]

I have customer that needs to upgrade his service from 800Amps to 1200Amps. He currently has a 120/240V 3 phase system and a 120/240V System With 2 separate Meters. I am advising that he upgrade and go to a 1200Amp 480V 3 phase system and transform down for existing loads. Will he save any costs on...

Convert 120 single phase to 480 3 phase [ 6 Answers ]

Hello, I have a project that I'm working on and had to purchase a 3 phase motor that requires 480V. Looking at past posts, it appears that several people are familiar with 480V 3 phase motors. What do I need to do/build to power it? Thanks!

208 volt3 phase why to single phase 120 volt [ 4 Answers ]

Supply is from 75 kva transformer, 3 phase delta /y three wire feeding a 30 amp breaker. 100 feet down stream is a junction box that I want to tap and produce a 120 v single phase ( 20 amp CB) supply. The junction box feeds a 6 amp motor