 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Cable lugs selection chart
1st question :- Alminum cable lugs are used for different cables, (a) Power cable LT 415V, 230V duty as well as for (b) 11kV/6.6kV/33kV duty also. If we keep current rating same , whether different sizes of lugs are recommended. ( it may be noted that fault level at higher voltages are more .)
We are confused certain manufacturer supplies cable joint kits with cable lugs of longer tail. 2nd question :- For HT XLPE cables ( since conductor cross section is perfectly circular, any special punching/crimping technique is needed ? |
||||
Check out some similar questions!
I want to ask where I will get the lug for the proper wire size or core cable If it shows how much amps it will carry in a single chart Otherwise tell me in which site I will get it
I currently have a Squared D 3 phase 400A NQM style main breaker inside a panel. The panel is now essentially full and I want to add a sub panel for expansion. The subpanel is 200A. My problem is how ro feed the sub panel. Are there add on kits or lugs to allow this? I even looked at a simple 3...
I need an example of a bidding chart or price chart... to estimate the a price when I bid on a place to clean. I'm in the office cleaning business.
Ihave a 200a panal in my house. I want to put a 200a sub in my barn. I know seimans don't make a 200a 2pole breaker. Is there a lug kit available for doing this? Any suggestions?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
